Cracked screen on your iPhone? Don’t worry, it’s fixable! Replacing an iPhone screen is a delicate process, but with some patience and the right tools, you can have your phone looking as good as new. You’ll need to purchase a replacement screen, gather some tools, and set aside some time to carefully disassemble and reassemble your iPhone.
Step by Step Tutorial: Replacing iPhone Screen
Before we dive into the steps, let’s understand what we’re trying to achieve. Replacing your iPhone screen involves removing the damaged screen and installing a new one. This process requires precision and attention to detail to prevent damaging other components.
Step 1: Gather Your Tools and Replacement Screen
Make sure you have all the necessary tools and a new iPhone screen ready.
You’ll need a pentalobe screwdriver, a Phillips screwdriver, a suction cup, a spudger, and a pair of tweezers. The replacement screen should come with all the components attached, such as the camera and speaker.
Step 2: Turn Off Your iPhone
Always start by turning off your iPhone to avoid any short circuits.
Hold down the power button and swipe to power off. It’s a simple step, but crucial for your safety and the safety of your device.
Step 3: Remove the Two Screws Next to the Charging Port
Use the pentalobe screwdriver to remove these screws.
These screws hold the screen in place, so keep them safe as you’ll need them to install the new screen.
Step 4: Use the Suction Cup to Lift the Screen
Place the suction cup near the home button and gently lift the screen.
You’ll need to apply a fair amount of force, but be careful not to pull too hard as you may damage the cables connecting the screen to the phone’s main body.
Step 5: Open the iPhone Like a Book
Gently swing the screen up, opening it to the side like a book’s cover.
This exposes the internal components, and you should see several connectors that attach the screen to the logic board.
Step 6: Disconnect the Battery Connector
Remove the screws securing the connector and use the spudger to disconnect the battery.
It’s important to disconnect the battery to prevent any electrical damage during the screen replacement.
Step 7: Disconnect the Screen Connectors
Remove the screws that secure the metal plate and use the spudger to disconnect the screen cables.
Be gentle and take your time. If a connector doesn’t come loose easily, don’t force it.
Step 8: Remove the Damaged Screen
Once all connectors are disconnected, you can remove the damaged screen.
Set it aside and prepare the new screen for installation.
Step 9: Connect the New Screen
Attach the new screen’s connectors to the logic board, ensuring they snap in place securely.
This step is like step 7 but in reverse. Take your time to line up each connector properly.
Step 10: Reassemble the iPhone
Carefully close the iPhone by swinging the new screen down and pressing it into place.
Replace the screws next to the charging port and power on your iPhone to test the new screen.
After completing these steps, your iPhone should be up and running with a brand new screen. The touch functionality, display quality, and overall performance should be restored to their original state.
Tips for Replacing iPhone Screen
- Always work on a clean, well-lit surface to avoid losing screws or damaging components.
- Keep track of screws and parts by laying them out in the order they were removed.
- Be patient and gentle when lifting the screen and disconnecting cables.
- If you’re not confident in your ability to replace the screen yourself, consider seeking professional help.
- Protect your new screen by using a sturdy case and screen protector after replacement.
Frequently Asked Questions
What if my iPhone doesn’t turn on after replacing the screen?
Make sure all connectors are securely attached and that the battery is connected properly.
Can I replace my iPhone screen without any experience?
It’s possible, but it’s recommended to watch tutorial videos or read detailed guides before attempting.
Do I need to transfer any components from the old screen to the new one?
Typically, the replacement screen comes with all necessary components, but you should check the product description to be sure.
What should I do if I lose a screw during the replacement process?
It’s best to order a replacement screw set for your iPhone model as each screw is specific to its location.
How can I tell if the replacement screen is high quality?
Look for reviews of the replacement screen and buy from reputable sellers to ensure quality.
Summary
- Gather tools and replacement screen.
- Turn off your iPhone.
- Remove screws next to charging port.
- Lift the screen with a suction cup.
- Open the iPhone like a book.
- Disconnect the battery connector.
- Disconnect the screen connectors.
- Remove the damaged screen.
- Connect the new screen.
- Reassemble the iPhone.
Conclusion
Replacing your iPhone screen can seem like a daunting task, but with the right tools and a bit of confidence, it’s an achievable project. Remember to work carefully and take your time with each step to avoid any unnecessary damage. If you’re ever in doubt, there’s no harm in seeking assistance from a professional repair service. The sense of accomplishment when you power on your iPhone and see the pristine new screen is well worth the effort. So, next time you find yourself with a cracked iPhone screen, don’t despair—just remember that it’s fixable!
Matthew Burleigh has been writing tech tutorials since 2008. His writing has appeared on dozens of different websites and been read over 50 million times.
After receiving his Bachelor’s and Master’s degrees in Computer Science he spent several years working in IT management for small businesses. However, he now works full time writing content online and creating websites.
His main writing topics include iPhones, Microsoft Office, Google Apps, Android, and Photoshop, but he has also written about many other tech topics as well.