This post contains affiliate links. As an Amazon Associate, solveyourtech.com earns from qualifying purchases, at no extra cost to you.
To reset an HP Officejet 6600 to factory defaults, press the Home button, touch the right arrow next to the touch screen, then touch Setup > Tools > Restore Factory Defaults. If you only want to fix a frozen printer or an error message, do a power reset instead: turn the printer off, unplug it for 60 seconds, and plug it back in. That keeps all your settings.
These steps are for the touch-screen HP Officejet 6600 e-All-in-One. HP has discontinued it, but the user guide is still on HP’s Officejet 6600 support page.
Which Reset Do You Need?
The Officejet 6600 has three kinds of reset, and each one clears a different amount.
| Reset | What it clears | Use it when |
|---|---|---|
| Power reset | Nothing. It only restarts the printer with no power for a minute. | The printer shows an error, freezes, or stops responding. |
| Restore Network Defaults | Network settings, including the saved Wi-Fi network and the admin password for the printer’s web page | You changed routers, the printer won’t rejoin Wi-Fi, or you forgot the admin password. |
| Restore Factory Defaults | The settings you changed on the printer, including the wireless connection | You’re giving the printer away, or settings changes caused a problem that a power reset didn’t fix. |
Start with the smallest reset that fits your problem. A factory reset won’t fix a hardware fault such as a failed printhead, so try the power reset first.
Printers without a screen work differently. For example, you restore default settings on the HP Color LaserJet CP1215 from HP’s Toolbox software on a computer.
How to Power Reset the Officejet 6600
- Turn the printer off. Press the Power button on the front of the printer. If it won’t turn off, go to step 2 and pull the cord.
- Wait for the light to go out. The HP user guide says to wait until the power light turns off before you unplug the cord or switch off a power strip. Unplugging too early can leave the printhead uncovered.
- Unplug the power cord from the wall outlet and from the back of the printer.
- Wait 60 seconds. This gives the printer’s electronics time to fully discharge.
- Plug the cord back in. Connect it straight to a wall outlet instead of a power strip or surge protector, then connect it to the printer.
- Turn the printer on. Press Power. The printer goes through its startup routine and returns to the home screen with all your settings in place.
Try printing again. If the same error comes back, move on to the factory reset or the troubleshooting section below.
How to Restore the Officejet 6600 to Factory Defaults
Before you start: a factory reset removes the printer’s Wi-Fi connection. Have your Wi-Fi network name and password ready so you can reconnect it afterward. If you use the printer as a fax, write down your fax header and number too.
- Turn on the printer and wait for the home screen to appear on the touch panel.
- Press the Home button. It’s the house-shaped button to the left of the touch screen. If you’re already on the home screen, nothing changes.
- Touch the right arrow to the right of the touch screen. A second page of icons appears, including Setup.

- Touch Setup. The Setup menu opens.
- Touch Tools. The Tools list opens.
- Touch the down arrow to scroll the list, then touch Restore Factory Defaults. If the printer asks you to confirm, touch Yes.

- Wait for the confirmation. The screen shows a message that the factory defaults have been restored. Press Home to go back to the home screen.
Next, reconnect the printer to Wi-Fi using the steps further down.
How to Reset Only the Network Settings
If your only problem is the Wi-Fi connection, you don’t need a full factory reset. The Officejet 6600 user guide has a separate option that clears just the network settings and the admin password for the printer’s built-in web page.
- On the printer, touch the right arrow, then touch Setup.
- Touch Network.
- Touch Restore Network Defaults, then touch Yes.
- Wait for the message that the network defaults have been restored.
The user guide suggests printing a network configuration page afterward to confirm that the network settings were reset.
How to Reconnect the Officejet 6600 to Wi-Fi After a Reset
Both the factory reset and the network reset disconnect the printer from your wireless network. The quickest way back is the printer’s Wireless Setup Wizard.
- Touch the right arrow, then touch Setup.
- Touch Network.
- Touch Wireless Setup Wizard, then touch OK.

- Pick your Wi-Fi network from the list and type its password with the on-screen keyboard. The printer connects and shows a confirmation.
If your router has a WPS button, the printer also supports Wi-Fi Protected Setup (WPS) with a push button or PIN. HP’s guide notes that you should only use WPS on a network that uses WPA encryption.
The Officejet 6600 connects only to 2.4 GHz Wi-Fi. If your router combines 2.4 GHz and 5 GHz under one name and the printer won’t join, check your router’s settings for a way to turn on a separate 2.4 GHz network.
After the printer is back on Wi-Fi, it may have a new IP address. Your computer may show the printer as offline until you remove it and add it again. To do that, follow the steps for finding a printer’s IP address and adding a printer in Windows 11 or 10. Print a test page to confirm everything works.
When the Touch Screen Doesn’t Respond
The touch screen doesn’t respond. Do the power reset above. A frozen screen usually clears after the printer is unplugged for a full minute.
The printer won’t turn off with the Power button. Unplug it from the wall, wait 60 seconds, and plug it back in. Avoid doing this while it’s printing, because the printhead may not park.
You can’t find Restore Factory Defaults. It’s near the bottom of the Tools list, so touch the down arrow to scroll. Make sure you went into Setup > Tools and not Setup > Network, which holds Restore Network Defaults instead.
The same error comes back after a reset. Errors such as a printer failure or printhead problem usually point to hardware or ink, not settings. Reseat the ink cartridges, check that none are empty, and turn the printer off and on again. For more checks, read the general guide to printer troubleshooting. If the error still won’t clear, HP’s Officejet 6600 manuals page has the full user guide, and HP Support can tell you about repair options. Given the printer’s age, out-of-warranty repair may cost more than a newer printer.
The printer won’t rejoin Wi-Fi. Move it closer to the router, make sure you’re picking the 2.4 GHz network, and check the password for typos. Then run the Wireless Setup Wizard again.
Officejet 6600 Reset Questions
Will a factory reset delete my Wi-Fi settings?
Yes. Restore Factory Defaults removes the wireless network the printer was using. You’ll need to run the Wireless Setup Wizard to connect it again.
Does a power reset change any settings?
No. A power reset only cuts power to the printer for a minute. Your Wi-Fi connection, fax settings and preferences all stay the same.
How do I reset the Officejet 6600 admin password?
Use Setup > Network > Restore Network Defaults. The HP user guide says this resets both the network settings and the administrator password for the printer’s web page. You’ll need to reconnect to Wi-Fi afterward.
Does a factory reset fix ink cartridge errors?
Usually not. Cartridge errors are about the cartridges themselves, so reseat or replace them first. The Officejet 6600 uses HP 932 black and HP 933 color cartridges, and you can buy ink for the Officejet 6600 from Amazon.
Can I still print from an iPhone to the Officejet 6600?
Yes, once it’s back on your Wi-Fi network. The steps for printing from an iPhone to an HP Officejet use the 6700, a closely related model with the same kind of setup.

Matthew Burleigh is the founder, head writer, and editor of Solve Your Tech, which he launched in 2012. He has written technology tutorials since 2008 and worked in IT since 2003, including small-business support, IT management, and consulting. He holds Bachelor’s and Master’s degrees in Computer Science from Arizona State University.
Matthew writes practical guides for Windows, iPhone and iPad, Microsoft Office, Outlook, Google apps, and Android. Solve Your Tech’s guides are checked step by step against the device or app maker’s own documentation and tested on his own devices whenever he has the hardware or software, with clear steps, sources, and update dates.
Read more about Matthew and how Solve Your Tech writes and updates its guides, or report a correction.