This post contains affiliate links. As an Amazon Associate, solveyourtech.com earns from qualifying purchases, at no extra cost to you.
To connect an HP Officejet 6700 to Wi-Fi, use the printer’s touchscreen: touch the right arrow, then Setup > Network > Wireless Setup Wizard > OK. Pick your network name from the list, type the Wi-Fi password, and confirm. The printer prints or shows a message when it’s connected.
These steps are for the HP Officejet 6700 Premium and happen entirely on the printer, so they work with any current router. The 6700 only supports 2.4 GHz Wi-Fi, so it can’t join a 5 GHz-only network.
Have Your Wi-Fi Details Ready
Have these ready before you touch the screen:
- Your Wi-Fi network name. This is also called the SSID. It’s the name you see when you join the network on your phone.
- Your Wi-Fi password. HP’s guide calls it the WPA passphrase or WEP key. If you never changed it, it’s usually printed on a sticker on the router.
- A 2.4 GHz network. Most routers broadcast 2.4 GHz and 5 GHz under one name, and the printer joins the 2.4 GHz side on its own. If your router has 2.4 GHz turned off, turn it back on in the router’s settings first.
- No Ethernet cable in the printer. A cable plugged into the printer’s network port turns off wireless. Unplug it before you start.
- The printer near the router. Put it within the same room or one room away while you set it up. You can move it later if the signal holds up.
You don’t need a computer, a USB cable or the old HP installation disc for this part. You only need those later, if you want to install HP’s software on a computer.
How to Connect the Officejet 6700 to Wi-Fi With the Wireless Setup Wizard
- Turn on the printer. Press the power button and wait until the home screen appears on the color touchscreen.
- Open the Setup menu. Touch the right arrow on the control panel to see more options, then touch Setup.
- Open the Network menu. Touch Network. You’ll see a list of network options, including Wireless Setup Wizard, Wi-Fi Protected Setup and Print Wireless Network Test.

- Start the wizard. Touch Wireless Setup Wizard, then touch OK. If the printer asks whether you want to continue or change the current setup, touch Continue. The printer searches for nearby networks, which takes a few seconds.
- Choose your network. Touch your network name in the list, then touch OK. If you see two similar names, such as “Home” and “Home-5G,” choose the one without “5G.”

- Enter the Wi-Fi password. Use the on-screen keyboard to type the password, then touch OK. Passwords are case-sensitive. Use the shift key for capital letters and the symbols key for numbers and punctuation.
- Confirm the settings. The printer shows the network name and password you entered. Check them carefully, then touch OK.
- Wait for the result. After a short wait, the screen says the connection was successful and lists the printer’s network details, including its IP address. Write the IP address down. You can use it to add the printer to a computer or to open the printer’s settings page in a web browser.

The blue Wireless light on the front of the printer stays on while wireless is on, and a wireless icon with curved bars appears on the home screen. More bars mean a stronger signal.
Shortcut from the home screen: You can also reach the same wizard by touching the wireless icon on the home screen. The printer shows a summary of its wireless status. Touch OK, then touch Wireless Setup Wizard and continue from step 4.
Check That the Printer Is on Your Network
Print a test page to confirm the connection and see the details in one place:
- Touch the right arrow, then Setup > Network.
- Touch Print Wireless Network Test.
The report shows the printer’s wireless status, its hardware (MAC) address and its IP address. If a check fails, the report points to what went wrong.
HP’s support page for the Officejet 6700 Premium has the full user guide and current drivers if you want HP’s own reference.
Other Ways to Connect the Officejet 6700 to Wi-Fi
Use WPS (push button) if your router has a WPS button
Wi-Fi Protected Setup (WPS) connects the printer without typing a password. It only works if your router has WPS turned on and the network uses WPA security.
- Touch the right arrow, then Setup > Network.
- Touch Wi-Fi Protected Setup and follow the prompts.
- Touch Push Button.
- Right away, press and hold the WPS button on your router for about 3 seconds.
- Wait up to two minutes for the printer to connect.
If your router doesn’t have a WPS button, choose PIN in step 3 instead. The printer shows a PIN on its screen, and you type it into the WPS section of your router’s app or admin page.
Many newer routers and mesh systems leave WPS turned off or don’t offer it. If you can’t find it, use the Wireless Setup Wizard instead.
Canon all-in-ones from the same era use a similar menu; for example, here is how to connect a Canon Pixma MX340 to Wi-Fi.
Switch from a USB or Ethernet connection to Wi-Fi
If the printer was set up with a cable before, unplug the Ethernet cable from the back of the printer, then run the Wireless Setup Wizard as described above. After the printer joins Wi-Fi, add it again on each computer as a network printer (see the next section), and remove the old USB copy of the printer from the computer if you no longer plug in the cable.
Add the Officejet 6700 to a Computer or Phone After It’s on Wi-Fi
Connecting the printer to Wi-Fi is the first half of the job. Each device that prints still needs to find it on the network.
- Windows 11: Go to Start > Settings > Bluetooth & devices > Printers & scanners, select Add device, and choose the Officejet 6700 when it appears. Microsoft’s instructions for installing a printer in Windows cover the “printer that I want isn’t listed” option. The steps for adding a printer in Windows 11 or 10 walk through each screen.
- Mac: Open System Settings > Printers & Scanners > Add Printer, Scanner, or Fax, select the Officejet 6700, then click Add. The 6700 supports AirPrint, so macOS can use it without extra HP software. If it doesn’t show up, you can add it by the IP address you wrote down, as shown in the steps for adding a printer to a Mac.
- iPhone or iPad: No setup is needed. The printer appears under Print in the Share menu of any app that prints, as long as your device is on the same Wi-Fi network. Here’s how to print from an iPhone to the Officejet 6700.
Your computer or phone must be on the same network as the printer. A phone on a guest network or on cellular data won’t see it.
The same rule applies when you send scans from an HP touch screen, such as when scanning to a computer from the Photosmart 6510.
Troubleshooting the Officejet 6700 Wi-Fi Connection
Your network isn’t in the list. Check that your router broadcasts on 2.4 GHz. If the network is hidden (the router doesn’t broadcast its name), the printer can’t find it automatically, so make the network visible in your router settings during setup. Moving the printer closer to the router also helps.
The password is rejected. Retype it slowly and check capital letters, the number 0 versus the letter O, and the lowercase l versus the number 1. If you changed the Wi-Fi password since the printer was last connected, the printer still has the old one saved, so run the wizard again with the new password.
The printer won’t connect to a new router. The 6700 was released before WPA3 security existed. If your router is set to WPA3-only, switch the router to WPA2/WPA3 mixed mode (some routers call it transition mode) or WPA2, then run the wizard again.
The printer connected, but your computer can’t find it. Confirm that the computer and printer are on the same network name, not a guest network. Print the Wireless Network Test and check the IP address, then add the printer by IP address. Firewall software on a computer can also block the printer, so temporarily turning the firewall off is a quick test.
The Wireless light is off. The wireless radio may be turned off. Touch the right arrow, then Setup > Network > Wireless, and touch On.
Nothing works and you want a clean start. Touch the right arrow, then Setup > Network > Restore Network Defaults, then Yes. This erases the saved network name and password and also resets the printer’s admin password for its web settings page. Run the Wireless Setup Wizard again afterward.
The printer drops off the network after a while. Restart the router and the printer, then print a Wireless Network Test. If the signal is weak, move the printer away from microwaves, cordless phone bases and thick walls, or closer to the router or a mesh node.
If you have the closely related Officejet 6600, resetting the HP Officejet 6600 explains its power reset, network reset and factory reset.
Officejet 6700 Wireless Questions
Does the Officejet 6700 work with 5 GHz Wi-Fi?
No. The 6700’s wireless supports 802.11b/g/n on the 2.4 GHz band only. Most routers broadcast both bands under one network name, and the printer joins the 2.4 GHz side automatically.
Do I need the installation CD to connect the Officejet 6700 to Wi-Fi?
No. The Wireless Setup Wizard runs on the printer’s touchscreen. On a computer, Windows and macOS can usually add the printer with their built-in drivers. If you want HP’s full software for scanning and ink levels, download it from HP’s support site instead of using the old disc.
How do I find my Officejet 6700’s IP address?
Print the Wireless Network Test from Setup > Network, or look at the success screen at the end of the wizard. Both show the IP address.
Do I have to reconnect the printer if I change my Wi-Fi password?
Yes. The printer keeps the old password, so it drops off the network after the change. Run the Wireless Setup Wizard again and enter the new password. Your computers usually reconnect to the printer automatically once it’s back on the same network.
What ink does the Officejet 6700 use?
It uses HP 932 black and HP 933 color cartridges (cyan, magenta and yellow), with higher-yield 932XL and 933XL versions. You can see Officejet 6700 ink options on Amazon.

Matthew Burleigh is the founder, head writer, and editor of Solve Your Tech, which he launched in 2012. He has written technology tutorials since 2008 and worked in IT since 2003, including small-business support, IT management, and consulting. He holds Bachelor’s and Master’s degrees in Computer Science from Arizona State University.
Matthew writes practical guides for Windows, iPhone and iPad, Microsoft Office, Outlook, Google apps, and Android. Solve Your Tech’s guides are checked step by step against the device or app maker’s own documentation and tested on his own devices whenever he has the hardware or software, with clear steps, sources, and update dates.
Read more about Matthew and how Solve Your Tech writes and updates its guides, or report a correction.