If you’re struggling to hear notifications on your iPad, you might need to turn on the ringer. This guide will quickly show you how to do that in a few simple steps. By the end, your iPad will make those important sounds again, and you’ll never miss an alert.
How to Turn on Ringer on iPad
In this section, we will guide you through the straightforward steps needed to turn on the ringer on your iPad. Follow these steps, and you’ll have your ringer up and running in no time!
Step 1: Open Settings
First things first, tap on the “Settings” app on your home screen.
The “Settings” app is your gateway to all the internal settings of your iPad. It’s shaped like a grey gear, and you can usually find it on your home screen. If you can’t see it, swipe down on your screen and type “Settings” in the search bar.
Step 2: Go to Sounds
Next, scroll down and tap on the “Sounds” option.
Under “Sounds,” you’ll find all the settings related to the audible alerts on your iPad. This is where you can adjust volumes and change the sound profiles for different notifications.
Step 3: Adjust Ringer and Alerts Slider
After entering “Sounds,” locate the “Ringer and Alerts” slider and move it to the right.
Moving the slider to the right increases the volume of your ringer and alerts. Test it out by sliding it back and forth until you reach a volume level you’re comfortable with.
Step 4: Check Mute Switch
Confirm that the side mute switch (if available on your model) is not turned on.
Some iPads have a physical mute switch on the side. If it’s toggled on, no amount of fiddling with the settings will unmute your iPad. Make sure this switch is flipped off.
Step 5: Test the Ringer
Finally, test your ringer by setting an alarm or asking someone to call you.
Setting an alarm or getting a call will let you know if your changes have worked. If you hear the sound, then congratulations, your ringer is now active!
Once you’ve completed these steps, your iPad’s ringer should be activated, allowing you to hear notifications, alarms, and incoming calls.
Tips for Turning on Ringer on iPad
- Check Software Updates: Always make sure your iPad is running the latest iOS version. Sometimes bugs related to sound settings are fixed with updates.
- Do Not Disturb: Ensure that “Do Not Disturb” mode is not enabled, as this can silence your ringer.
- Volume Buttons: Use the volume buttons on the side of your device to quickly adjust the ringer volume.
- AssistiveTouch: Enable AssistiveTouch in the Accessibility settings for easier access to sound controls.
- Headphones: If you often use headphones, ensure they’re not connected, as this can route sound away from the speakers.
Frequently Asked Questions
Why can’t I hear any sounds on my iPad?
Check if your iPad is in “Do Not Disturb” mode or if the physical mute switch is turned on.
How do I adjust the volume on my iPad?
You can use the volume buttons on the side of your iPad or adjust it from the “Sounds” section in Settings.
Can I use the ringer with headphones?
No, when headphones are plugged in, notifications will only sound through the headphones, not the speakers.
What if the ringer still doesn’t work?
Try restarting your iPad or checking for any available software updates.
How do I know if the mute switch is on?
Look for the small, orange line on the mute switch. If it’s showing, the switch is on, and your device is muted.
Summary
- Open Settings
- Go to Sounds
- Adjust Ringer and Alerts Slider
- Check Mute Switch
- Test the Ringer
Conclusion
Turning on the ringer on your iPad is pretty easy, right? By following our simple steps, you’ll ensure that you never miss another important call or notification. Always remember to check your settings regularly and keep your software up to date. If you have any more questions or run into issues, don’t hesitate to seek further help or consult Apple’s support resources. Armed with this knowledge, you’re ready to make the most out of your iPad’s sound capabilities. Now, go ahead and enjoy the full functionality of your device!
Matthew Burleigh has been writing tech tutorials since 2008. His writing has appeared on dozens of different websites and been read over 50 million times.
After receiving his Bachelor’s and Master’s degrees in Computer Science he spent several years working in IT management for small businesses. However, he now works full time writing content online and creating websites.
His main writing topics include iPhones, Microsoft Office, Google Apps, Android, and Photoshop, but he has also written about many other tech topics as well.