How to Replace iPad Screen: A Step-by-Step Guide for DIY Enthusiasts

Replacing an iPad screen might seem like a daunting task, but with the right tools and a bit of patience, you can do it yourself. The process involves removing the broken screen, disconnecting necessary cables, and carefully attaching a new screen. Follow these steps, and you’ll have your iPad looking brand new in no time.

How to Replace an iPad Screen

Replacing an iPad screen involves several detailed steps. You’ll need to remove the damaged screen, disconnect the necessary cables, and attach a new screen. This guide will walk you through each step to ensure you complete the task successfully.

Step 1: Gather Your Tools

Before you start, gather all the tools you’ll need such as a plastic spudger, a pentalobe screwdriver, tweezers, and of course, your replacement screen.

Having the right tools is crucial. Using the wrong ones could damage your iPad even more. Make sure to have everything laid out in an organized manner to make the process smoother.

Step 2: Power Off Your iPad

Step 2: Power off your iPad completely before starting the repair.

This step is essential to avoid any electrical issues. Hold the power button until the slider appears, then slide to turn off. Make sure the iPad is completely off before proceeding.

Step 3: Remove the Broken Screen

Step 3: Use the plastic spudger to carefully pry up the edges of the broken screen.

Take your time with this part. Slowly work your way around the screen, gently lifting it to avoid damaging internal components. Be cautious of any glass shards from the broken screen.

Step 4: Disconnect Cables

Step 4: Once the screen is lifted, disconnect the cables that attach it to the iPad’s internals.

Locate the cables that connect the screen to the iPad. Carefully disconnect them using the tweezers, ensuring you do not damage any connectors.

Step 5: Attach the New Screen

Step 5: Connect the new screen by attaching the cables and securing it into place.

Carefully attach the new screen’s cables to the connectors. Once connected, gently press the screen into place, ensuring it is secure.

Step 6: Power On and Test

Step 6: Once the new screen is in place, power on the iPad to test if everything works correctly.

Hold the power button to turn on the iPad. Check the new screen for responsiveness and functionality. If everything works fine, you’ve successfully replaced your iPad screen.

Once you’ve completed these steps, your iPad should be good as new! You might notice a significant improvement in the display and touch response. Don’t forget to dispose of the old screen properly.

Tips for Replacing an iPad Screen

  • Work in a Clean Area: Keep your work area clean and free of dust to prevent any debris from getting inside your iPad.
  • Be Gentle: Handle all components with care to avoid further damage.
  • Use a Screen Protector: After replacing the screen, consider using a screen protector to prevent future damage.
  • Backup Data: Always backup your data before starting the repair, just in case something goes wrong.
  • Take Your Time: Don’t rush through the process. Taking your time can prevent mistakes that might damage your iPad.

Frequently Asked Questions

Can I replace the iPad screen myself?

Yes, you can replace the iPad screen yourself if you have the right tools and follow the steps carefully.

How long does it take to replace an iPad screen?

It usually takes about 1-2 hours to replace an iPad screen, depending on your experience level.

Is it cheaper to replace the iPad screen myself?

Generally, yes. Replacing the screen yourself can save you money compared to taking it to a professional repair shop.

What should I do if the new screen doesn’t work?

If the new screen doesn’t work, double-check the connections and ensure they are securely attached. If it still doesn’t work, the screen might be faulty.

Can a cracked screen damage other components?

Yes, a cracked screen can potentially damage other components if not replaced promptly, as glass shards can get inside the device.

Summary of Steps

  1. Gather Your Tools
  2. Power Off Your iPad
  3. Remove the Broken Screen
  4. Disconnect Cables
  5. Attach the New Screen
  6. Power On and Test


Replacing an iPad screen may seem intimidating, but with the right approach, it’s entirely doable. By following the outlined steps—gathering your tools, powering off your device, carefully removing the broken screen, disconnecting and reconnecting cables, and finally attaching the new screen—you can save both time and money. Remember, patience is key. Take your time, and ensure you handle each component with care to avoid additional damage.

If this guide helped you successfully replace your iPad screen, consider sharing it with friends or family who might be facing the same issue. For further reading on DIY tech repairs, there are plenty of online forums and video tutorials that can provide additional insights and tips. So go ahead, grab those tools, and give your iPad a new lease on life!

Join Our Free Newsletter

Featured guides and deals

You may opt out at any time. Read our Privacy Policy