Taking a screenshot on an iPad 10 is super simple and can be done in just a few steps. You just have to press the Top button and the Volume Up button at the same time. Then, quickly release both buttons. Your screen will flash, and you’ll hear a camera shutter sound, indicating that the screenshot has been successfully captured.
Step by Step Tutorial: How to Screenshot on iPad 10
In this tutorial, we’ll go through the exact steps to take a screenshot on your iPad 10. By the end, you’ll have a perfectly captured image of your screen saved to your Photos app.
Step 1: Locate the Top Button and the Volume Up Button
First, find the Top button, which is on the top edge of your iPad, and the Volume Up button, which is located on the right side.
These buttons are easy to spot and reach while holding your iPad in your hand. The Top button is used for locking your iPad, while the Volume Up button controls the sound.
Step 2: Press Both Buttons Simultaneously
Next, press and hold the Top button and the Volume Up button at the same time.
Timing is crucial here. Make sure you press these buttons at the same moment. If you press one before the other, it might not work.
Step 3: Quickly Release Both Buttons
Immediately release both buttons after pressing them.
You don’t need to hold the buttons for long. Quickly releasing them ensures that you capture just the screen without triggering other functions.
Step 4: Look for the Flash and Hear the Shutter Sound
Observe the screen; it will flash white, and you will hear a camera shutter sound.
This visual and audio signal confirms that the screenshot has been taken. If you don’t see the flash or hear the sound, try the steps again.
Step 5: Access the Screenshot from the Photos App
Finally, open the Photos app on your iPad to find the screenshot.
Screenshots are automatically saved in the Photos app. You can edit, share, or delete them as needed.
After you complete these steps, your iPad will capture whatever is on the screen at that moment. The image will be saved to your Photos app, where you can view, edit, or share it.
Tips for Taking Screenshots on iPad 10
- If you have trouble pressing both buttons at once, try using AssistiveTouch. It allows you to take screenshots with on-screen controls.
- To quickly mark up your screenshot, tap the thumbnail that appears in the bottom left corner after taking the screenshot.
- You can crop your screenshot directly in the Photos app if you captured more than you intended.
- Screenshots can be shared via Messages, Email, or Social Media directly from the Photos app.
- If you mistakenly trigger Siri by holding the Top button too long, release it and try the screenshot action again.
Frequently Asked Questions
What if my iPad doesn’t make the camera sound?
Make sure your iPad is not in silent mode. You can check this by seeing if the mute switch is turned on or if the volume is down.
Can I take a screenshot without using the buttons?
Yes, you can enable AssistiveTouch in the Settings app and use on-screen controls to take a screenshot.
Where do my screenshots go after I take them?
Screenshots are saved in the Photos app, under the “Screenshots” album.
How can I edit my screenshot?
Open the screenshot in the Photos app, tap “Edit,” and you can crop, rotate, or add filters and annotations.
What if I want to take a screenshot of a whole webpage?
You can take a screenshot of an entire webpage in Safari by selecting “Full Page” after taking the screenshot.
Summary
- Locate the Top and Volume Up buttons.
- Press both buttons simultaneously.
- Quickly release both buttons.
- Look for the flash and hear the shutter sound.
- Access the screenshot from the Photos app.
Conclusion
Taking a screenshot on your iPad 10 is a breeze once you know the steps. Whether you’re capturing a funny meme, important information, or just something you want to remember, screenshots are super handy. Don’t forget to check out your Photos app afterward, where you can make all the tweaks you need. For more advanced options like capturing a full webpage or using AssistiveTouch, dive into the settings and explore. Now you’re all set to become a screenshot pro on your iPad 10!
Matthew Burleigh has been writing tech tutorials since 2008. His writing has appeared on dozens of different websites and been read over 50 million times.
After receiving his Bachelor’s and Master’s degrees in Computer Science he spent several years working in IT management for small businesses. However, he now works full time writing content online and creating websites.
His main writing topics include iPhones, Microsoft Office, Google Apps, Android, and Photoshop, but he has also written about many other tech topics as well.